V9080iS series

8.4inchesTFT16.7M colorSVGA3ch serialSD I/FA/mini B USBCOM I/FLAN 1chAudioVideo optionRGB option

V9080iS series

V9080iSD

DC power

V9080iSB series

V9080iSBD

DC power

Categories: , ,

Dimensions and Part Names

V9080iS
Power supply Rated voltage DC24V
Permissible range of voltage ±10%
Permissible momentary power failure within 1ms
Demand (maximum rating) 28W or less
Insulation resistance DC500V 10MΩ or more
Physical environment Ambient temperature 0~50℃ *1
Ambient humidity 85%RH or less (without dew condensation) *1
Operation altitude 2,000 meters or lower
Atmosphere Not to be exposed to corrosive gas, or conductive dust
Storage temperature -10~60℃ *1
Storage humidity 85%RH or less (without dew condensation) *1
Overvoltage category Category II
Pollution degree Pollution degree 2
Mechanical operating conditions Resistance to oscillation Complies with JIS B 3502 (IEC61131-2) Vibration frequency: 5̃9Hz, pulsating with:3.5mm,
9̃150Hz, Acceleration: 9.8m/s2(1G),X,Y,Z: 3 directions (10 times each)
Resistance to shock Complies with JIS B 3502 (IEC61131-2) Peak acceleration: 147m/s2(15G), X,Y,Z:
3 directions, three times each (18 times in total)
Electric operating conditions Resistance to noise Noise voltage: 1,500Vp-p, pulse width: 1μs, pulse rise time: 1ns
Resistance to static discharge Complies with IEC61000-4-2, contact: 6kV, air: 8kV
Installation conditions Grounding Grounding resistance: Less than 100Ω, FG/SG separation
Structure Protection structure: Front case: IP66, Type 4X/13 *2(when water-proof gasket is used), Rear case: IP20, single unit, installation method: panel mounting
Cooling system Natural air cooling
Dimensions W*H*D(mm) 235.0×180.0×48.9
Panel cutout (mm) 220.5×165.5(+0.5/-0)
Case color Light gray
(black front housing for black model)
Material PC resin
  • *1: Use at a wet-bulb temperature of 39°C or less because higher temperatures may cause failure.

Performance Specifications

Screen memory (FROM) 64MB
Backup memory (SRAM) 800KB
Display Display device TFT color LCD
Resolution 800×600
Display size 8.4″
Colors 16.7 million*3
Backlight LED
Backlight life 70,000 hours
Touch switch Type Analog resistance film
Function switch Quantity 8
External interface D-Sub 9-pin (CN1) RS-232C/ RS-485(2-wire system)/ RS-422(4-wire system),
Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none,
Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200, 187500 *4bps
Modular 8-pin
(MJ1/MJ2)
RS-232C/ RS-485(2-wire system), Asynchronous type,
Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits,
Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200 bps
SD card One card slot provided as standard
Ethernet 1ch,
Baud rate: 100Mbps,
10Mbps
Wireless LAN *5 Complies with IEEE802.11b/g/n (2.4GHz)
USB Type A,Type mini-B(Ver.2.0)
Sound output 1ch provided as standard
Clock Backup period 5 years (Ambient temperature 25°C)
Calendar accuracy Gap ±90 sec. per month (Ambient temperature 25°C, when power is not supplied)
Standard CE marking EN61000-6-2、EN61000-6-4、EN50581 *7
UL・cUL UL61010-1、UL61010-2-201 *6、ANSI/ISA 12.12.01 *2
KC *7*8 Compliant
Radio Act *5 Japan: TELEC
Classification Standard *7*9 Nippon Kaiji Kyokai (NK)
American Bureau of Shipping (ABS)
Lloyd’s Register of Shipping (LR)
Det Norske Veritas (DNV)
  • *2: Hardware of Ver. b or later.
  • *3: For displaying pictures, 3D parts,video, and RGB input (excluding high-speed mode) only. Other parts are displayed in 65,536 colors.
  • *4: Only for Siemens MPI (Incompatible with DUR-00).
  • *5: Wireless LAN-compatible products only.
  • *6: Only for Hardware Ver. f or later. Applicable standard for Hardware Ver. a to e is UL 508.
  • *7: Wireless LAN compatible products are not supported.
  • *8: Black model not certified
  • *9: Hardware Ver. c or higher.

Dimensions and Part Names

(Unit: mm)

Side view Front view Rear view
Side view Front view Rear view
Bottom view Panel cutout
Bottom view Panel cutout
Part Names
  1. 1Display
  2. 2Function switch
  3. 3Power lamp
  4. 4Communication unit connector (EXT1)
  5. 5Fall prevention hook
  6. 6Optional unit connector (EXT2)
  7. 7SD card access LED
  8. 8Battery holder
  9. 9DIP switch
  10. 10USB cable holding hole
  11. 11SD card connector
  1. 12Sound output connector (AUDIO)
  2. 13Power input terminal block
  3. 14Modular jack 1 (MJ1)
  4. 15Modular jack 2 (MJ2)
  5. 16PLC connector (CN1)
  6. 17100BASE-TX/10BASE-T port (LAN)
  7. 18USB-A(U-A)
  8. 19USB mini-B(U-B)
  9. 20Screw hole

System Configuration

 

Standard Model

Standard Model

Reviews

There are no reviews yet.

Be the first to review “V9080iS series”

Your email address will not be published. Required fields are marked *